If you want to move USDT from Ethereum to Solana, you have two broad options: use a cross-chain bridge, or swap USDT ERC20 to Solana on a crypto exchange that supports both versions. This guide focuses on the second route. It explains how to prepare a Solana wallet, how to transfer USDT ERC20 to SPL (the Solana token standard) step by step on AviorSwap, and which mistakes to avoid so your USDT arrives on the right network.
Many people search for how to bridge USDT to Solana. The goal is the same: you start with USDT on Ethereum and end up with USDT on Solana. The method below gets you there without a bridge.
Why people move USDT from Ethereum to Solana
USDT on Ethereum and USDT on Solana are both issued by Tether. Tether's supported protocols page lists the Ethereum contract (0xdac17f958d2ee523a2206206994597c13d831ec7) and the Solana mint address (Es9vMFrzaCERmJfrF4H2FYD4KCoNkY11McCe8BenwNYB). The token tracks the same dollar, but each version lives on its own network, so the network changes how you can use it.
Common reasons to move:
- Speed. Solana is built for fast block production, so transfers usually confirm quickly
- Lower network costs in general terms. Solana's documentation describes a base fee of 5,000 lamports per signature plus an optional prioritization fee. On Ethereum, ethereum.org explains that the fee is gas used multiplied by the base fee plus a priority fee, and a token transfer uses more gas than a plain ETH transfer. For frequent or smaller transfers, the Solana side is usually less costly to use
- Solana apps and wallets. If you trade or use apps in the Solana ecosystem, holding USDT on Solana saves you a network change every time
- Receiving platform. The wallet or platform you plan to send to may accept USDT on Solana
If you are still deciding which network suits you, read our USDT on Solana vs ERC20 guide (https://aviorswap.com/blog/eth-to-usdt-solana-vs-erc20). This article assumes you have already chosen Solana.
How a swap differs from a cross-chain transfer
A cross-chain bridge is a protocol that connects two blockchains. In general, you send tokens to the bridge on one chain and receive tokens on the other chain. Depending on the bridge, what you receive may be a wrapped or bridged representation of USDT rather than the version issued by Tether on that network. Bridges also involve their own smart contracts, steps and risks.
AviorSwap is a swap, not a bridge. AviorSwap is a crypto exchange, and it lists USDT (Ethereum) and USDT (Solana) as two separate assets. You deposit USDT on ERC20, swap it to USDT (Solana) in the swap form, and withdraw USDT on Solana. There is no bridge contract involved on your side: you send one asset and receive the other.
What this means in practice:
- You work with one platform and a familiar swap screen
- You see the live quote before you commit
- You still need to get both networks right: Ethereum when depositing, Solana when withdrawing
Prepare your Solana wallet first
Before you start the swap, make sure the Solana side is ready. This step is specific to moving USDT from Ethereum to Solana, and skipping it causes most delays.
Get a Solana address
- Use a wallet that supports Solana, such as Phantom, Solflare or Backpack, or a platform that accepts USDT (Solana) deposits
- Copy your Solana receiving address. It is a base58 string and does not start with 0x
- Do not reuse your Ethereum address. An address starting with 0x is not a Solana address
If the destination is another platform rather than your own wallet, open its deposit page, choose USDT, and confirm that "Solana" or "SPL" is offered as the network. Copy the address from that page.
Hold a small amount of SOL
On Solana, network fees are paid in SOL, not in USDT. If your Solana wallet holds USDT but no SOL, you can receive USDT, but you cannot send it on later. Keep a small amount of SOL in the wallet for network costs.
Understand token accounts
Solana's documentation explains that tokens are held in token accounts linked to your wallet, typically an Associated Token Account, and that accounts must hold a rent-exempt reserve in SOL. Most wallets handle this automatically, but it is one more reason to keep a little SOL on hand.
Check the Ethereum side
- Your USDT should be ERC20 USDT on Ethereum
- To send it to your AviorSwap deposit address you need ETH in the sending wallet for the Ethereum network fee
See how much USDT on Solana you'll get
Open the swap form (https://aviorswap.com/swap), choose Sell USDT (Ethereum) and Buy USDT (Solana). Enter any amount in the swap form to see the live rate before you sign up. The form shows the live quote with no account needed.
How to move USDT from Ethereum to Solana on AviorSwap
Step 1: See the quote. On the swap page (https://aviorswap.com/swap), select USDT (Ethereum) as the asset you sell and USDT (Solana) as the asset you buy. Check how much USDT on Solana you will receive.
Step 2: Sign up with email. Create an account with your email address and a strong password. Keep your login details private.
Step 3: Deposit USDT (ERC20). In your dashboard, choose USDT (Ethereum) as the deposit asset and copy the deposit address shown. Send USDT from your Ethereum wallet on the Ethereum network only. For a first deposit, consider a small test transfer, and wait until the deposit is confirmed.
Step 4: Swap to USDT (Solana). Go to the swap page, select USDT (Ethereum) as the asset you sell and USDT (Solana) as the asset you buy, review the live quote and confirm.
Step 5: Withdraw on Solana. Choose USDT (Solana) for withdrawal, select Solana as the network, and paste the Solana address you prepared. Check the address and confirm.
AviorSwap accepts crypto deposits only. There are no card payments, bank transfers or fiat deposits.
Common mistakes when moving USDT ERC20 to Solana
Wrong network on deposit
AviorSwap accepts USDT deposits on ERC20 and Solana only, and does not support TRC20. When depositing USDT (Ethereum), send on the Ethereum network. Sending from another network to that address may mean the funds do not arrive.
Wrong address type on withdrawal
The most common error in this move is pasting a 0x Ethereum address when withdrawing USDT on Solana. A Solana address has no 0x prefix. If you see 0x, stop and copy the correct address from your Solana wallet.
Picking the wrong USDT in the swap
USDT (Ethereum) and USDT (Solana) are listed separately. If you select USDT (Ethereum) on both sides by mistake, nothing changes. Make sure the Buy field shows USDT (Solana).
No SOL in the receiving wallet
Your USDT arrives, but you cannot move it until you add SOL for network costs.
Copying an address from history
Scammers send tiny transfers from look-alike addresses, hoping you will copy them from your history. This is called address poisoning. Always copy the address from your wallet's receive screen.
If something does go wrong, our guide on what to do if you sent USDT on the wrong network (https://aviorswap.com/blog/sent-usdt-wrong-network-recover) explains the options. For a wider overview of swapping other coins into USDT, see our step by step guide to swapping crypto to USDT (https://aviorswap.com/blog/how-to-swap-crypto-to-usdt-erc20-or-solana).
Quick checklist before you withdraw
- The Buy asset in the swap was USDT (Solana)
- The withdrawal network is Solana
- The receiving address has no 0x prefix and was copied from your Solana wallet
- The first and last characters match on both screens
- The receiving wallet or platform accepts USDT on Solana
- The receiving wallet holds a little SOL
- You sent a test amount to any new address
FAQ
Can I send ERC20 USDT directly to a Solana address?
No. ERC20 USDT lives on Ethereum and cannot be sent to a Solana address directly. You need to change networks first, for example by swapping USDT (Ethereum) to USDT (Solana) on a crypto exchange and then withdrawing on Solana.
Is AviorSwap a bridge?
No. AviorSwap is a crypto exchange. You deposit USDT on ERC20, swap it to USDT (Solana), and withdraw on Solana. The two versions are listed as separate assets.
Do I need SOL to receive USDT on Solana?
Keep a small amount of SOL in your Solana wallet. Network costs on Solana are paid in SOL, and you need it to move your USDT later.
Can I see the rate before creating an account?
Yes. The swap form shows a live quote for USDT (Ethereum) to USDT (Solana) for the amount you enter, with no sign-up.
Does AviorSwap support moving USDT to or from TRC20?
No. AviorSwap supports USDT on ERC20 and on Solana only.
The bottom line
To move USDT from Ethereum to Solana, prepare a Solana address and a little SOL first, then swap USDT (Ethereum) to USDT (Solana) and withdraw on the Solana network. The swap route avoids bridge contracts on your side, but it still depends on two checks: Ethereum when you deposit, Solana when you withdraw.
See how much USDT on Solana you'll get on AviorSwap (https://aviorswap.com/swap) before you sign up.